Different types are used in different places. We all know that the right is the best. So how can we buy the right industrial vacuum cleaner equipment? In fact, it is not difficult.
We have to base on the conditions of use, location, and waste status in the factory. , The power supply situation to consider the following points:
1. How long is the working time, such as three to four hours at a time, or 24 hours non-stop.
2. Whether to use both wet and dry, depends on whether or not to inhale liquid during actual work.
3. The power supply is selected according to the actual situation. If there is three-phase power, the industrial situation will be more stable if it is used as much as possible.
4. Filtration accuracy requirements. Generally, conventional vacuum cleaners are suitable for general requirements. For clean rooms and purification workshops with higher accuracy requirements, the type should be selected according to the dust-free level. The above points can be selected carefully. Industrial vacuum equipment!
Different industries have very different functional requirements for industrial vacuum equipment. Some industries do not produce too much dust, waste and other debris during production and processing, so low-power
industrial vacuum equipment can meet the demand. Some industries are too extensive. The scale of the factory itself is relatively large. During the production and processing, a large amount of dust, waste, oil fume, irritating particulate matter, and other pollutants are inevitably produced, such as mechanical processing plants, electronics factories, coating powder factories, Grinding factories, food factories, pharmaceutical factories, paper mills, chemical factories, etc., are also difficult problems that we urgently need to actively solve at present, and ordinary industrial vacuum cleaners cannot solve them. Large-scale industrial vacuum equipment is necessary to achieve better results. What are the requirements for this industrial vacuum equipment? This industrial vacuum equipment requires strong suction, large capacity, and high quality. It is cleaning Good equipment for metal dust and plastic fine dust.
In order to prevent the decrease of the suction power of the industrial vacuum cleaner used in the workshop, the filter element should be cleaned regularly. It can be blown with a tap or an air pump. If it is really dirty, it can also be cleaned with water. The cleaning method with air pump blowing can be done frequently, but water washing is not recommended, because washing will make the filter hole larger. Frequent washing will reduce the filtering effect of the filter, which is not a good thing for vacuum cleaners! It is really dirty. It is recommended to wash with water only when cleaning up!
As environmental protection requirements are getting higher and higher, everyone is paying more and more attention, and all walks of life have designated environmental protection standards. Otherwise, it will face the risk of suspending business for rectification, but if different industries meet the standards? For example aluminum chips and dust generated by machine tools, grinders, and CNC measuring machines; small rags in the textile industry; dust in the production workshop, dust on the workbench, etc. Wait. This manual cleaning is more troublesome; but if you don’t clean it, one is that the environmental protection is not up to standard, and the other is that the production environment is not good, and it is not good for the work. This requires the use of industrial vacuum cleaners for cleaning. These few simple examples highlight the characteristics of the industrial vacuum cleaner's importance.
Publication Date: 28 August, 2020
Category:
Industrial Vacuum Cleaner
